Feature:
1. Using CCD digital image sensor for automobile lighting design, lighting using digital and software technology,
the daytime image clarity, night low light intensity.
2. Visual angle of 170 degrees large visual range, reversing more secure
The application range of -30 DEG C to +60 DEG C is in full compliance with automotive environmental applications.
3. Take back the reference line (electronic ruler line), the distance of obstacle is clear.
4. Digital photosensitive chip processing, night vision effect is obvious.
5. The factory has been tested by high pressure immersion test and 12 hours electricity aging test. The multi layer
waterproof design is designed to ensure high pressure washing and soaking waterproof.
6. Installed at the end of the car handle and license plate lights, equipped with self tapping screws.
7. Video line monitor, the power line to connect the car taillight power supply, reversing, reversing monitoring system
automatically start work, you can clearly see the car after the situation.
8. The LCD is compact and convenient. The bracket can move up and down and adjust the angle required by the basic
customers. It can be made into on-board monitor.
9. Video system: NTSCPAL automatic switching.
10. Signal input: two video input, all the way back, all the way to DVD and other video.
11. Superman design, reversing automatic boot, off file, self power off
Specification:
| Pixel | 756*720 |
| Power supply | DC 6-32V |
| Input voltage | DC6-32V |
| Image sensor | PC7070 |
| Image standard | NTSC/PAL |
| Diagonal angle | 170 degree |
| Rated voltage | DC12V |
| Protection level | IP67 |
| Display format | 16:9 power is less than 3W |
| Display | .3 inches TFT-LCD digital screen |
| Resolution | 480 (H) X 272 (V) |
| Video | All the way to reverse the rear view input, all the way DVD input, reversing priority |
| Video input system | PAL/NTSC double standard automatic switching |
| Reversing function | After the camera is connected, automatic switching, rear view and Automatic wake-up function can be realized |
How to install:
Fix the camera to a special design hole in your car.
Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power
Connect the power of the camera to your car reverse lights – red wire to positive and black wire to negative.
Connect the video cable of the camera to the extension cord.
Connect the extension cord to your car monitor.
You will see the images when your car is in reverse shift.
=>Take out your stock license plate light at the back of your car
=>Fix the camera to where the stock license plate light was.
=>You will see the images when your car is in reverse shift.
Package Included:
1 X Car Mirror Monitor
1 X Car Rear View Camera
1 X Power Line
2 X Screws
Features
| Pixel | 756*720 |
| Power supply | DC 6-32V |
| Input voltage | DC6-32V |
| Image sensor | PC7070 |
| Image standard | NTSC/PAL |
| Diagonal angle | 170 degree |
| Rated voltage | DC12V |
| Protection level | IP67 |
| Display format | 16:9 power is less than 3W |
| Display | .3 inches TFT-LCD digital screen |
| Resolution | 480 (H) X 272 (V) |
| Video | All the way to reverse the rear view input, all the way DVD input, reversing priority |
| Video input system | PAL/NTSC double standard automatic switching |
| Reversing function | After the camera is connected, automatic switching, rear view and Automatic wake-up function can be realized |
