Automotive ra dar collision avoidance system for automotive exercise berths safety auxiliary devices. The system is equipped with an ultrasonic sensor, and can accurately detect whether there is an obstacle after the car. Its principle is to use the com mand and control operation of the microcomputer system, respectively, suggest azimuth and distance to the obstacle between the body and through the sound barrier and monitor, secure parking
Unique features:
◆ The new upgrade, dual digital display, dual-core reversing ra dar,
reversing after starting the car while four of the probe, will start before the car
around the edge of the two probes, to prevent reversing rub angle, more safe and accurate
◆ The Smart Start function: new design, more intelligent, when braking, the ra dar starts,
there are obstacles into the detection area, the monitor will start work. More humane, more scientific.
◆ Multi-function button: Provides voice switch button, users can switch key display,
can be muted, beeps, voice, or four voice + buzzer sound mode, switch between.
◆ Sound button: 7 files provided for the user to sound regulation, only true dual-core can.
◆ Display new design: B MW adapter, separate design, solve the big problem.
Car reversing ra dar technical parameters:
◆ Detection distance: front of the car: 0.3-0.8M rear: 0.3-2.3 m
◆ Voltage: 12v
◆ Operating Current: 20ma-200ma
◆ Maximum power: 2w
◆ Ultrasonic frequency: 40khz detection
◆ Angle: h> 80 ° v> 70 degrees
◆ Working temperature: -20c ~ + 80c
◆ Alert volume:> 70DB
Alarm mode:
◆ Voice prompts: The system uses mute, beep,
live voice switching between the three modes .. The closer the obstacle, the more rapidly
◆ Light bar Tip: Using three colors of light bar, heartbeat prompted obstacle distance
◆ Digital Tip: In the middle of the display, a significant number of tips obstacle distance,
precise and accurate, at a glance
About Installation:
Installation is simple, you can elect to install the
Note the installation:
1) Probe mounting height requirement from the ground about 50CM, if the installation is too low,
it will detect the ground after the probe will have a UP, a small arrow Peu geot, the small arrow up on it,
but there are special models, the bumper camber In particular, individual needs some adjustment
2) Experienced installation technicians, in the opening installation, will probe card or a perforated plastic trim look, the probe is send out ultrasonic vibration, so the tightness of the probe to fit in, to be more accurate measurement
Package included:
1x Display (cable length 6.5m)
1x Host probe
1x 22mm hole
1x Host Stickers
1x Power Cord
1x English Safety instruction
4x Probe line
8x 22mm probe (probe line after the car length 2.5m, front length 6.5m) (Color: Silver)
