The Launch Creader CR8021 is built to take your diagnostic experience to a whole new level. Loaded with TPMS sensor reset, oil service reset, battery registration and reset, parking brake pad relearn after replacement and diesel particulate filter regeneration functions, CR8021 can access the available modules for the best diagnosis operations.
1. Engine Check
(I/M readiness status, Query freeze frame data, Read current DTCs, Clear DTCs, O2 sensor monitoring test, On-board monitor test, On-board system or component control, Read vehicle information )
2. ABS System Scan
The auto bleed procedure is used on BOSH 5.3 equipped vehicles. This procedure uses a scan tool to cycle the system solenoid valves and run the pump in order to purge the air from the secondary circuits.
3. Airbag System Scan
Your airbag crash data module will be restored back to its factory condition after accidents
4. Oil Service Reset
Allows you to perform reset maintenance mileage and data intervals for a new calculation of Engine Oil Life system once changed the oil.
5. EPB Electrical Brake Pad Reset
it is important in the maintenance of electronic braking system's safety and efficiency when replace brake pad or motor
6. BMS Battery Reset
allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the new battery replacement, and activate the rest state of the vehicle battery system
7. DPF Diesel Particulate Filter Regeneration
specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
DPF Function have either reset or regeneration,please leave us message first with car model and release year, thank you! If need DPF, please tell us car model and release year to confirm if it can support
8. TPMS Tire Pressure Sensor Reset
Makes tpms senser in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and activate tpms sensors.