Three ways of optical fiber signal input switch to one set of SPDIF/ToLink signal receive device
Audio format support:LPCM2.0/Dolby-AC3
Support signal retiming
Used optical fiber cable loss less than 0.2Db/m,Output distance is up to 40m
Over-voltage protection can prevent the damage caused by connecting unmatched power adapter to the machine
No loss of quality
Installs in minutes
Need DC5V/500mA power supply
To use the optical fiber cable to connect the optical fiber signal Destination(such as blue-ray,the computer and so on)with the splitter input.
To let the output port connected to the optical fiber signal receiver(such as amplifier,home theater and so on)by using the optical cable.
Connect 5V power supply to the splitters DC input port.
Support audio format:LPCM2.0/Dolby-AC3
Max baud rate:16Mbps
Output cable distance:≤40m(Use the optical fiber cable loss less than 0.2Db/m)
Max working current:100mA
Power adapter format: Input:AC(50Hz)100V-240V;Output:DC5V/500mA
Operating Temperature range:0 to +40℃
Operation Humidity range:5 to 90%RH(No Condensation)
Dimension (L x W x H):54x54x23.5mm
1x Power adapter