● Boot tone
● After completion of the temperature setting tone
● Manual / Auto Sleep
● Sleep forgotten power-tone (half hour)
●Wake valid indicator shows (last decimal point).
● First wake tone (no beep after you wake up)
Start sharing program
Default with 12MM aviation head
It is Design for T12, T2 heater.but Support 1322 heater, ATTEN heater.
1. Working AC Voltage: 12-26V DC: 6-36V
2. Temperature setting range, 180 --435 degrees
3. Automatic sleep / hibernate Auto sleep manually when you still do not have the machine 10 minutes, automatically converted into energy-saving sleep mode, stop heating. * Manual dormant but when you press the knob, manual into a power-saving sleep state, stop heating, LED light dimmed.
4. Auto Wake-up / manual wake up / wake switch * Automatic wake ball a ball switch, to achieve high sensitivity wake (sleep) function, as long as you gently pick up the soldering iron, it automatically wake heated response, but also the voice prompt, very convenience. ● Manual wake light knob is pressed, the manual also can wake heated. LED variable light
5. Sleep switch with indicator (Sleep @ LED dimmed light, digital tube closed, heating suspend, hibernate forgot to turn off electric tone)
6. Temperature setting, the rotary knob clockwise to increase the temperature value. When the knob counter-clockwise to reduce the temperature. After setting the buzzer and tone. And automatically saved for the next boot with.
7. PCB board size 42MM * 67MM.
8. Machine small size, easy to carry high width 88MM 40MM 138MM length
9. Support for the core can handle, remove the protective tube steel sleeve. Pull direct heating core, (note !! T12 heater is not spin and twist. Because there are two electrodes, spin and twist are easily damaged)
1 x Use the 936 transformer Soldering station controller circuit board for digital A1322 T12 T2 Heating Core